**fScan Reference Manual, Chapter 2 (CmdLineOptions): set color**

===== Set Color -- Set a color variable =====
**usage:**\\
 ** -set colorN value **\\
 ** -set colorN taskbar **

This SET command can be used to set the 3 internally defined color variables. The VALUE can be a color name or a 24-bit RGB number. RGB values are typically entered as a number in hexidecimal format, starting with a '0', ending with an 'h', and using 2 digits (0-9a-f) each for the red, green, and blue components. Recognized color names and their equivalent RGB values are:
  black       0
  white    0ffffffh
  red      0ff0000h
  green      0ff00h
  blue         0ffh
  yellow   0ffff00h
  purple   0ff00ffh
  cyan       0ffffh
  gray     0808080h
  grey     0808080h
  orange   0cf7b00h
  pink     0ff8080h
  brown    07b4b00h

If the color value is specified as "taskbar", the color variable will be set to the color of the most recently clicked in the taskbar menu.

The color variables can be used in fScan commands as "$colorN" (where N is 1-3); if N is missing, 1 is assumed.  Some commands also use color variables specified simply by the number (1-3).

**See Also:**\\
[[jvs:fscan:manual:chapter2:set|Set]] 

[[jvs:fscan|fScan Home]], 
[[jvs:fscan:manual|fScan Manual]], 
[[jvs:fscan:manual:chapter2|CmdLineOptions]], 
[[jvs:fscan:manual:help|Manual Help]]