**fScan Reference Manual, Chapter 3 (KeyCmds:SurfKeys): flags **
===== Flags -- Specify surface display flags =====
**usage: mode,flg f**\\

With no arguments, this command displays the current flag settings for the surface window.

Syntax synopsis:
  f	        - display surface flags
  flg f		- set current surface flag to FLG
  mode,flg f
  mode,flg,flg2 f
  
  Mode= 0 - set current surface flag to FLG (default)
          FLG: 1 - fast (2nd surface)
               2 - nofast (don't switch to 2nd surface)	
               4 - wireframe view
             010 - clockwise rendering of triangles
             020 - perspective view
             040 - flat view
            0100 - don't show triangles
            0200 - no lighting
            0400 - no depth
           01000 - render both sides of triangles
           02000 - GT depth
  
          FLG2: 0 - turn off bit(s)
                1 - turn on bit(s)
                2 - toggle bit(s)
          default - set value
  Mode= 1 - window surface flag
  Mode= 2 - stereo settings
    2,flg,flg2,angle f
          FLG: 0 - off
               1 - on
               2 - toggle on/off
               4 - on reversed
          FLG2: 1 - Side by side
                2 - 2 separate windows
                4 - Red/Green
              010 - Red/Blue
              020 - Red/Cyan
  Mode= 3 - Depth flag
          FLG: 0 - normal
               1 - reversed
               2 - toggle normal/reversed
  Mode= 4 - No-Draw flag
          FLG: 0 - off (draw normally)
               1 - on (don't redraw surface window)
               2 - toggle 0/1
      
**See Also:**\\
[[jvs:fscan|fScan Home]],
[[jvs:fscan:manual|fScan Manual]],
[[jvs:fscan:manual:chapter3|KeyCmds]],
[[jvs:fscan:manual:chapter3:surfkeys|SurfKeys]],
[[jvs:fscan:manual:help|Manual Help]]