User Tools

Site Tools


biac:experimentalcontrol:biac6hardware

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
biac:experimentalcontrol:biac6hardware [2016/09/06 15:22]
cmp12 [BIAC6 3T -- Mach computer]
biac:experimentalcontrol:biac6hardware [2022/11/18 16:08] (current)
Line 7: Line 7:
   * Second monitor video output connected to video switch (CPU 2)   * Second monitor video output connected to video switch (CPU 2)
   * Stereo sound output to audio switch boxes   * Stereo sound output to audio switch boxes
 + 
   * Current Design 8-button serial response device (USB)   * Current Design 8-button serial response device (USB)
     * button box mode: "HHSC-2x4-C" response box     * button box mode: "HHSC-2x4-C" response box
     * button mode : "HID NAR 12345" (**003**)      * button mode : "HID NAR 12345" (**003**) 
       * must check this mode if power is cycled to the interface       * must check this mode if power is cycled to the interface
-  * MagConcepts Joystick (USB Gaming device)+  * Current Design 2 axis, 2 button joystick shared between 2 scanners ) 
 +    * autoconfigure 
 +    * HID Joystick 
 +    * USB - Tethyx 
 +    * after use switch back to button box with above settings 
   * E-Prime SR box (no button box, just scanner trigger) (COM1: 19200 baud, 8 bits, no parity)   * E-Prime SR box (no button box, just scanner trigger) (COM1: 19200 baud, 8 bits, no parity)
   * Video switch serial cable on **COM2**   * Video switch serial cable on **COM2**
Line 20: Line 26:
   * BioPac Respiratory belt signal connected as MeasComp analog input 0 (ADC0), biopac analog ch4   * BioPac Respiratory belt signal connected as MeasComp analog input 0 (ADC0), biopac analog ch4
   * BioPac Cardiac signal connected as MeasComp analog input 1 (ADC1), biopac analog ( pulse wave ch6 )   * BioPac Cardiac signal connected as MeasComp analog input 1 (ADC1), biopac analog ( pulse wave ch6 )
-  * BioPac GSR signal connected as MeasComp analog input 2 (ADC2), biopack analog ch1 +  * BioPac GSR signal connected as MeasComp analog input 2 (ADC2), biopac analog ch1 
-  * Scanner trigger signal connected as MeasComp analog input 3 (ADC3)+  * Scanner trigger signal connected as MeasComp analog input 3 (ADC3), biopac analog ch9
   * Scanner trigger is also connected to the MCC counter pin (CTR), this would show up as a number increase NOT a positive pulse   * Scanner trigger is also connected to the MCC counter pin (CTR), this would show up as a number increase NOT a positive pulse
    
Line 66: Line 72:
   * [[http://www.measurementcomputing.com/PDFmanuals/sm-ul-user-guide.pdf|Universal Library User Guide]]   * [[http://www.measurementcomputing.com/PDFmanuals/sm-ul-user-guide.pdf|Universal Library User Guide]]
   * [[http://www.biopac.com/Manuals/mp_hardware_guide.pdf|biopac manual]]   * [[http://www.biopac.com/Manuals/mp_hardware_guide.pdf|biopac manual]]
 +
 +==== MCC digital channel to BIOPAC digital channel mapping ====
 +^MCC ^BIOPAC^
 +|  DA0 | “Trig” |
 +|  DA1 |  D9 |
 +|  DA2 |  D10|
 +|  DA3 |  D11|
 +|  DA4 |  D12|
 +|  DA5 |  D13|
 +|  DA6 |  D14|
 +|  DA7 |  D15|
  
 [[biac:experimentalcontrol:biac5hardware|BIAC5 Scanner]]\\ [[biac:experimentalcontrol:biac5hardware|BIAC5 Scanner]]\\
 [[biac:experimentalcontrol:inventory|Back]] [[biac:experimentalcontrol:inventory|Back]]
  
biac/experimentalcontrol/biac6hardware.1473175375.txt.gz · Last modified: 2016/09/06 15:22 by cmp12