User Tools

Site Tools


biac:experimentalcontrol:eyetracker

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
biac:experimentalcontrol:eyetracker [2014/12/11 14:45]
cmp12 [Mounting the camera inside the video goggles]
biac:experimentalcontrol:eyetracker [2023/02/23 18:43] (current)
Line 38: Line 38:
  
 ====== Starting the eyetracker software ====== ====== Starting the eyetracker software ======
-You must start the "Viewpoint" eyetracker program (on Donders at the 3T) in order to activate the video camera.  During the setup process, the Viewpoint display should be visible to the subject. Use the [[biac:experimentalcontrol:kvm|KVM switch]] to send the Viewpoint image to the goggles, if the subject is wearing the goggles.  Use the switch to send the Viewpoint display to the projector regardless of whether the subject is using the goggles or the projector; that way the MR tech can see the camera image as well+You must start the "Viewpoint" eyetracker program (on Donders at the 3T) in order to activate the video camera.  During the setup process, the Viewpoint display should be visible to the subject. Use the [[biac:experimentalcontrol:hdmi|video switch]] to send the Viewpoint image to the goggles, if the subject is wearing the goggles.  Use the switch to send the Viewpoint display to the projector; that way the MR tech can see the camera image as well.
- +
-Note: If you are using the goggles, the video display on Donders must be in 800x600 mode.  At this resolution you will not be able to see the entire Viewpoint GUI, but the goggles only work at the 800x600 video setting.+
  
 In the [[biac:experimentalcontrol:eyetrackviewpoint|Viewpoint window]] you should be able to see the live camera image. If you don't, use the menu option **View->Video Reset** to reconnect the camera.  If that does not work, check all the cable connections and the On/Off switch inside the magnet room to make sure everything is properly connected. You should also check the **View->Mode** menu option to make sure the camera is in Setup display mode. In the [[biac:experimentalcontrol:eyetrackviewpoint|Viewpoint window]] you should be able to see the live camera image. If you don't, use the menu option **View->Video Reset** to reconnect the camera.  If that does not work, check all the cable connections and the On/Off switch inside the magnet room to make sure everything is properly connected. You should also check the **View->Mode** menu option to make sure the camera is in Setup display mode.
biac/experimentalcontrol/eyetracker.1418309138.txt.gz · Last modified: 2014/12/11 14:45 by cmp12