Differences

This shows you the differences between two versions of the page.

--- biac:experimentalcontrol:eyetracker [2014/12/11 14:46]
cmp12 [Starting the eyetracker software]
+++ biac:experimentalcontrol:eyetracker [2023/02/23 18:43] (current)
@@ Line 38: / Line 38: @@
 ====== Starting the eyetracker software ======
-You must start the "Viewpoint" eyetracker program (on Donders at the 3T) in order to activate the video camera.  During the setup process, the Viewpoint display should be visible to the subject. Use the [[biac:experimentalcontrol:kvm|KVM switch]] to send the Viewpoint image to the goggles, if the subject is wearing the goggles.  Use the switch to send the Viewpoint display to the projector; that way the MR tech can see the camera image as well.
+You must start the "Viewpoint" eyetracker program (on Donders at the 3T) in order to activate the video camera.  During the setup process, the Viewpoint display should be visible to the subject. Use the [[biac:experimentalcontrol:hdmi|video switch]] to send the Viewpoint image to the goggles, if the subject is wearing the goggles.  Use the switch to send the Viewpoint display to the projector; that way the MR tech can see the camera image as well.
 In the [[biac:experimentalcontrol:eyetrackviewpoint|Viewpoint window]] you should be able to see the live camera image. If you don't, use the menu option **View->Video Reset** to reconnect the camera.  If that does not work, check all the cable connections and the On/Off switch inside the magnet room to make sure everything is properly connected. You should also check the **View->Mode** menu option to make sure the camera is in Setup display mode.

Brain Imaging & Analysis Center

User Tools

Site Tools

Differences

Page Tools