Differences

This shows you the differences between two versions of the page.

--- biac:experimentalcontrol:gsr [2016/09/07 13:15]
cmp12 [GSR Equipment]
+++ biac:experimentalcontrol:gsr [2023/02/23 18:43]
@@ Line 1: / Line 1: @@
-**[[biac:experimentalcontrol|Experimental Control System Home Page]]**
-=====GSR Equipment=====
-  * Currently there is a Biopac [[http://www.biopac.com/Research.asp?Pid=3641&Main=Systems|MP150]] acquisition system installed at both scanners.
-  * Each system is equipped with Biopac's [[http://www.biopac.com/Research.asp?Pid=4487|GSR100C]] Galvanic Skin Response Amplifier.
-  * Each system has all necessary MRI compatible leads and filters.
-=====Current Hardware Settings=====
-The Biopac GSR amplifier has several switches.  The switches are typically set to the following values, which should be reasonable for general usage. Hardware switches should not be changed by individual users.
-  * Gain = 5 micromho/V ... for expected DC response between 0-50 micromho
-  * Low Pass = 1 Hz ... sufficient for almost all GSR studies
-  * High Pass = Direct Current ... no filtering provides absolute readings
-=====Software interface for recording GSR =====

Brain Imaging & Analysis Center