This is an old revision of the document!
The video AND audio connections between the computers, dvd player, monitors, 3D LCD at each scanner pass through a software-controllable video switching box. The box is located in the rack that contains the 2 stimulus control PC's in the scanner equipment room.
Currently at BIAC6 the video switching box only connects the audio/video signals. The keyboard and mouse devices on the console desk are connected directly to their respective computers and cannot be changed. This means you will probably find it hard to work if you connect monitor 1 to CPU 2 (or vice-versa) because the keyboards and mice will be linked to the wrong screens.
The monitors contain integrated speakers and there is an HDMI audio extraction device connected to the subject's headphones as input. This means that the audio signal to the subject is just another connection controlled by the switching software and the audio toggle switch no longer exists. If you send CPU1 to Screen1, both audio and video from the stimulus presentation computer are sent. So send audio/sound from the primary stimulus presentation computer to the console room and the subject, send CPU1 Primary to Left Screen, Projector and Headphones.
The current connections at BIAC6 are:
|In1 : CPU1 Primary||Out1 : Left Screen|
|In2 : CPU1 Secondary||Out2 : Middle Screen|
|In3 : CPU2||Out3 : Right Screen|
|In4 : Blu-Ray||Out4 : Projector|
|In5 : Extra Console Input||Out5 : 3D LCD|
|Out6 : Subject Headphones|
The name of the new switching software is Switch APv2.0 and its a simple “connect-the-devices” interface. Select an IN and an OUT and press “ENTER” … this will visually connect them on the software GUI.
Below are a couple common configurations: