Differences

This shows you the differences between two versions of the page.

--- biac:experimentalcontrol:kvmsoftware [2011/03/31 14:49]
127.0.0.1 external edit
+++ biac:experimentalcontrol:kvmsoftware [2023/02/23 18:43] (current)
@@ Line 1: / Line 1: @@
 **Experimental Control System**
-=====KVM Switch Software=====
+=====Video Switch Software=====
 To set the video input for the subject, open the NTVideoSwitch program by left clicking on the 'Start' menu at the bottom left of the screen and choosing 'Programs' and 'NTIVideoSwitcher'.\\
 Note: If the VideoSwitcher software does not work on one PC, try it on the other PC (see [[biac:experimentalcontrol:inventory|Connections]].)
@@ Line 8: / Line 8: @@
 The software provides a matrix display with video inputs (labelled CPU's) across the top and output devices (labelled USERS) listed along the left side (see figure). To connect an input to an output you simply click on the appropriate box in the matrix.
-{{http://hawking.biac.duke.edu/docs/controlsys/graphics/videoswitchcomp1.jpg}}
+At BIAC5:\\
 The inputs (CPU's) are:
   * CPU 1: Stimulus computer, primary video
@@ Line 17: / Line 16: @@
   * CPU 5: Auxiliary computer, secondary video
-At BIAC3, the outputs (USER's) are:
+The outputs (USER's) are:
-  * User 1: Left monitor
-  * User 2: Right monitor
-  * User 3: Goggles
-  * User 4: Video projector
-  * User 5: Middle monitor
-At BIAC5, the outputs (USER's) are:
   * User 1: Left monitor
   * User 2: Right monitor
   * User 3: Video projector
   * User 4: Middle monitor
+At BIAC6:\\
+The inputs (CPU's) are:
+  * CPU 1: Stimulus computer, primary video
+  * CPU 2: Stimulus computer, secondary video
+  * CPU 3: Auxiliary computer, primary video
+  * CPU 4: DVD player
+The outputs (USER's) are:
+  * User 1: Left monitor
+  * User 2: Middle monitor
+  * User 3: Right monitor
+  * User 4: Video projector
+  * User 5: Goggles
+Sample switch settings at BIAC6:\\
+{{http://hawking.biac.duke.edu/public/vswitchBiac6.jpg?600x400}}
 If you are running the VideoSwitch software on the stimulus control computer, it might be a good idea to exit from this switching program after you have set the video connections, before running your stimulus control software. This is because the software used to control the switch might possibly affect the timing and display properties of other programs when both are running at the same time.
-  * [[biac:experimentalcontrol:kvm|Back to KVM switch]]
+  * [[biac:experimentalcontrol:kvm|Back to Video switch]]
   * [[biac:experimentalcontrol|Back to Experimental Control System]]

Brain Imaging & Analysis Center

User Tools

Site Tools

Differences

Page Tools