User Tools

Site Tools


biac:experimentalcontrol:biac5hardware

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
biac:experimentalcontrol:biac5hardware [2016/09/07 13:22]
cmp12 [Video Switch Connections]
biac:experimentalcontrol:biac5hardware [2021/08/05 14:34]
cmp12
Line 6: Line 6:
   * Second monitor video output connected to KVM switch (CPU 2)   * Second monitor video output connected to KVM switch (CPU 2)
   * Stereo sound output to audio switch boxes (CPU1 - switch 1)   * Stereo sound output to audio switch boxes (CPU1 - switch 1)
-  * NeuroScan 4-button response box via E-Prime SRbox (COM1: 19200 baud, 8 bits, no parity)+  * E-Prime SRbox (COM1: 19200 baud, 8 bits, no parity)
   * GE scanner cardiac/respiratory cable (COM4)   * GE scanner cardiac/respiratory cable (COM4)
   * Serial cable to Kulpe computer (COM3: 56K baud, 8 bits)   * Serial cable to Kulpe computer (COM3: 56K baud, 8 bits)
-  * Serial cable to KVM video switch (COM2) 
   * Current Design 8-button serial response device (USB keyboard device, default mode)   * Current Design 8-button serial response device (USB keyboard device, default mode)
     * button box mode: "HHSC-2x4-C" response box     * button box mode: "HHSC-2x4-C" response box
Line 15: Line 14:
       * must check this mode if power is cycled to the interface       * must check this mode if power is cycled to the interface
  
-  * MagConcepts Joystick (USB Gaming device)+  * Current Design 2 axis, 2 button joystick 
 +    * autoconfigure 
 +    * HID Joystick 
 +    * USB - Tethyx 
 +    * after use switch back to button box with above settings 
   * Measurement Computing Analog/Digital data acquisition device (USB-1208FS, dev=0, 8 a/d chans)   * Measurement Computing Analog/Digital data acquisition device (USB-1208FS, dev=0, 8 a/d chans)
      * to reset AD device disconnect USB cable.      * to reset AD device disconnect USB cable.
Line 27: Line 31:
   * Measurement Computing Box, DigPort-A0 Output to Analog Ch6 In, to BioPac Analog 8 input   * Measurement Computing Box, DigPort-A0 Output to Analog Ch6 In, to BioPac Analog 8 input
   * Measurement Computing Box, DigPort-A1 Output to Analog Ch7 In   * Measurement Computing Box, DigPort-A1 Output to Analog Ch7 In
 +
 ==== BIAC5 3T -- Kulpe computer==== ==== BIAC5 3T -- Kulpe computer====
-Kulpe is our accesory computer. It is usually connected to the monitor on the right.\\+Kulpe is our accessory computer. It is usually connected to the monitor on the right.\\
 Kulpe has the following peripheral hardware connected: Kulpe has the following peripheral hardware connected:
   * Keyboard, video, and mouse connected to KVM video switch (CPU 3)   * Keyboard, video, and mouse connected to KVM video switch (CPU 3)
   * BioPac communication (RJ45) cable   * BioPac communication (RJ45) cable
   * Serial cable to Darwin computer (COM1)   * Serial cable to Darwin computer (COM1)
 +
 ==== BIAC5 3T -- Other devices==== ==== BIAC5 3T -- Other devices====
-  * DVD player, video output connected to KVM switch (CPU 5) +  * DVD player connected to HDMI switch 
-  * DVD player, sound connected to Audio switch (DVD - switch 3) + 
-  * Stereo sound jack for I-pod, MP3, etc connected to Audio switch (Aux - switch 4)+
 ==== Video Switch Connections ==== ==== Video Switch Connections ====
 +[[biac:experimentalcontrol:hdmi|HDMI Video Switcher Info]]
 +
 === Source Devices === === Source Devices ===
-  * CPU1 = Primary Display Computer (Darwin), primary video output +  * IN1 = Primary Display Computer (Darwin), primary video output 
-  * CPU2 = Primary Display Computer (Darwin), secondary video output +  * IN2 = Primary Display Computer (Darwin), secondary video output 
-  * CPU3 = Secondary/Eyetracker Computer (Kulpe) +  * IN3 = Secondary/Eyetracker Computer (Kulpe) 
-  * CPU4 Not connected +  * IN4 DVD Player 
-  * CPU5 DVD player +  * IN5 Not connected 
-  * CPU6 = Not connected +  * IN6 = Not connected 
-  * CPU7 = Not connected +  * IN7 = Not connected 
-  * CPU8 = Not connected+  * IN8 = Not connected 
 === Output Devices === === Output Devices ===
-  * OUT1 = <del>Left Monitor</del> (faulty port)+  * OUT1 = Left Monitor
   * OUT2 = Middle Monitor   * OUT2 = Middle Monitor
   * OUT3 = Right Monitor   * OUT3 = Right Monitor
   * OUT4 = Projector   * OUT4 = Projector
-  * OUT5 = Not connected+  * OUT5 = Headphones
   * OUT6 = Not connected   * OUT6 = Not connected
   * OUT7 = Not connected   * OUT7 = Not connected
-  * OUT8 = Left Monitor +  * OUT8 = Not connected
-=== Default Configuration "Stimulus to Subject" === +
-Note: If you double-click the "Reset Video Switch" icon on the desktop, you will get the following configuration: +
-^ Source ^Output        ^Labels^ +
-|Darwin 1|<del>Left Monitor</del>|CPU1 -> OUT1| +
-|Darwin 2|Middle Monitor|CPU2 -> OUT2| +
-|Kulpe   |Right Monitor |CPU3 -> OUT3| +
-|Darwin 1|Projector     |CPU1 -> OUT4| +
-|DVD     |No device     |CPU5 -> OUT5| +
-|Darwin 1|No device     |CPU1 -> OUT6| +
-|Darwin 1|No device     |CPU1 -> OUT7| +
-|Darwin 1|Left Monitor  |CPU1 -> OUT8|+
  
- +==== MCC digital channel to BIOPAC digital channel mapping ====
- +
- +
-=== MCC digital channel to BIOPAC digital channel mapping ===+
 ^MCC ^BIOPAC^ ^MCC ^BIOPAC^
 |  DA0 | “Trig” | |  DA0 | “Trig” |
Line 81: Line 76:
 |  DA6 |  D14| |  DA6 |  D14|
 |  DA7 |  D15| |  DA7 |  D15|
 +
 +
 ==== See also ==== ==== See also ====
   * [[http://www.mccdaq.com/usb-data-acquisition/USB-1208FS%20.aspx|USB-1208FS]]   * [[http://www.mccdaq.com/usb-data-acquisition/USB-1208FS%20.aspx|USB-1208FS]]
biac/experimentalcontrol/biac5hardware.txt · Last modified: 2022/04/20 17:52 by tbh6