jvs:cigal:manual:chapter6:r_pwrite
CIGAL Reference Manual, Chapter 6 (RealTime): r_pwrite
r_pwrite -- Write data to an external output port
usage: r_pwrite opflg eflag ltime Databuf chan [ nchars flag]
Write data to an external serial or parallel port. CHAN value 100 is printer parallel port, lower values are serial ports (1=COM1, 2=COM2, etc.).
NOTE: Serial input ports must be configured before being read. To configure the port you should load the configuration bitflag into the COM1 (or COM2) number variable (see COM1[4]).
See Also:
r_pread, CIGAL Home, CIGAL Manual, RealTime List, Manual Help
jvs/cigal/manual/chapter6/r_pwrite.txt · Last modified: 2024/06/21 15:44 by 127.0.0.1