biac:experimentalcontrol:gsr
Table of Contents
Experimental Control System Home Page
GSR Equipment
Current Hardware Settings
The Biopac GSR amplifier has several switches. The switches are typically set to the following values, which should be reasonable for general usage. Hardware switches should not be changed by individual users.
- Gain = 5 micromho/V … for expected DC response between 0-50 micromho
- Low Pass = 1 Hz … sufficient for almost all GSR studies
- High Pass = Direct Current … no filtering provides absolute readings
Software interface for recording GSR
biac/experimentalcontrol/gsr.txt · Last modified: 2024/06/21 15:44 by 127.0.0.1