CIGAL Reference Manual, Chapter 2 (Commands): PORTIO
usage: portio flag port write_data (FLAG == 1,3,5)
or: portio flag port read_data (FLAG == 0,2)
or: portio flag port write_data read_data (FLAG == 4)
PORTIO reads or writes the value specified by DATA to or from the I/O port specified by PORT. Reading or writing is controlled by FLAG, as:
FLAG = 0 Read 1 byte from PORT, put into READ_DATA 1 Write 1 byte from WRITE_DATA to PORT 2 Read 1 word (16 bits) from PORT, put into READ_DATA 3 Write 1 word (16 bits) from WRITE_DATA to PORT 4 Write 1 byte from WRITE_DATA to PORT, then read 1 byte from PORT+1 and put it into READ_DATA 5 Write low byte of WRITE_DATA to PORT, then write high byte to PORT+1
WARNING: Reading or writing I/O ports can be dangerous; proceed with caution.
See Also:
CIGAL Home,
CIGAL Manual,
Commands List,
Manual Help