This shows you the differences between two versions of the page.
jvs:cigal:manual:chapter9:hang [2011/08/25 15:55] voyvodic |
jvs:cigal:manual:chapter9:hang [2023/02/23 18:43] |
||
---|---|---|---|
Line 1: | Line 1: | ||
- | **CIGAL Reference Manual, Chapter 9 (Troubleshooting): | ||
- | |||
- | ===== Troubleshooting -- CIGAL hangs during initialization ===== | ||
- | |||
- | **Problem: | ||
- | |||
- | **Cause:** The problem is likely caused by an external device being in an unusable state. The Measurement Computing analog/ | ||
- | |||
- | **Solution: | ||
- | If that does not work, then powering down and then restarting your computer should help (power down first, don't just reboot). | ||
- | |||
- | **Note:** At the BIAC scanners the USB device is located in the scanner equipment room. On both scanners the USB cable is labelled "MC USB" | ||
- | __BIAC3__: Find the cable marked "MC USB" where it enters the black A/D connection box, sitting on top of the PC computer rack at the far end of the equipment room. Unplug the cable, wait 10 seconds, then plug it back in.\\ | ||
- | __BIAC5__: Find the cable marked "MC USB" where it enters the black multi-USB connector box, sitting on the floor behind the PC computer rack just inside the door in the equipment room. Unplug the cable, wait 10 seconds, then plug it back in. | ||
- | |||
- | **See Also:**\\ | ||
- | [[jvs: | ||
- | |||
- | [[jvs: | ||
- | [[jvs: | ||
- | [[jvs: | ||