Differences

This shows you the differences between two versions of the page.

--- jvs:fscan:manual:chapter2:display [2012/02/08 14:34]
voyvodic
+++ jvs:fscan:manual:chapter2:display [2023/02/23 18:43] (current)
@@ Line 4: / Line 4: @@
 =====  =====
 The DISPLAY command controls fScan's interactive display properties.
+  * DEV - The DEV argument can be any recognized X host; default is local display.
-  * DEV - The DEV argument can be any recognized X host, either by IP address or name (e.g. myhost, or myhost.biac.duke.edu, or 152.3.98.222).
+    *  Examples:  myhost, myhost.biac.duke.edu, 152.3.98.222
-  * FLG - The FLG argument is a bit flag with the following meanings:\\
+  * FLG - The FLG argument is a bit flag with the following meanings:
     * 1 - show only one window at a time (<enter> or 'j' to switch)
     * 2 - onscreen (overrides default OFFSCREEN setting when displaying across a network)
@@ Line 14: / Line 14: @@
     * 040 - don't display any interactive menus
     * 0100 - don't display window text
+    * 0200 - don't display any windows (for running scripts with embedded interactive commands)
+    * 01000 - turn windows on/off to raise to front (use if window manager does not raise windows properly)
+    * 02000 - flip RGB bytes when creating JPG images
   * PANELS - PANELS can be used to specify how many rows to use for showing images; the default is to arrange panels in multiple rows (see also '-set showpanes').
   * ZOOM - Zoom factor to be applied to all windows (see also '-set showzoom').

Brain Imaging & Analysis Center