User Tools
ShowPlay Reference Manual, Chapter 3 (ControlVariables): atrig_val
Atrig_val -- External signal level to use as triggering threshold
The ATRIG_VAL variable is used to specify how to use an external analog signal to trigger the start of a paradigm. ATRIG_VAL is used when TRIG_FLAG is set and TRIGTYPE is 3, indicating that an external analog signal will be used for the trigger. The ATRIG_CHAN variable should be set to specify which analog channel is to be used as the trigger signal.
Analog voltage transitions that cross the ATRIG_VAL threshold will be considered trigger pulses. By default, either positive or negative transitions are recognized as triggers for starting the paradigm (TRIG_FLAG & 2). If TRIG_FLAG indicates that trigger pulses should be recorded throughout the paradigm, only positive transitions will be recorded.
See Also:
Trigtype,
Atrig_chan,
Atrig_val,
Dstartmask)
CIGAL Home,
CIGAL Manual,
ShowPlay Home,
ShowPlay Manual,
InputParameters List,
Manual Help
